4-STAGE STAINLESS STEEL JENFAB WASHER, MODEL #MCCS-3000SS2F , 3-LANE 12" WIDE MESH BELTS

Sold

4-STAGE STAINLESS STEEL JENFAB WASHER, MODEL #MCCS-3000SS2F , 3-LANE 12" WIDE MESH BELTS

Location:Toledo, OH

Description

4-STAGE STAINLESS STEEL JENFAB WASHER, MODEL #MCCS-3000SS2F , 3-LANE 12" WIDE MESH BELTS

MFG: JRI Holdings

NEW 2016

MODEL MCCS3000SS2F

Stainless Pass Through Washer

4 Stage: Wash, Rinse, Fresh Rinse, HABO

51" Wide Tunnel Split into (3) 12" Work width spaces 1"x1" S.S. Belt

Part Height 10" 

470 lbs Weight Capacity Evenly Distributed

Work Flow: 

18" Load

18" Entry

36" Wash

18" Drain

18" Entry

36" Recirculating Rinse

18" Drain

24" DI Water Rinse Non-Recirculating

72" Hot Air Blow Off

18" Unload 

Stainless Steel on all wetted surfaces, Plumbing and Pumps are all stainless.

Wash Stainless Gusher 5 H.P. Pump 150 GPM @ 35 PSI (475 Gal Tank.) 60 KW Electric Heat 

Rinse Stainless Gusher 5 H.P. Pump 150 GPM @ 35 PSI (475 Gal Tank.) 40 KW Electric Heat 

Filtration System 8x30 Stainless Steel (1) Wash (1) Rinse 

Restrictive Flow Valves S.S. Wash, Rinse, and non-recirculating Di-Rinse 

Auto and Manual Fill 

Drain Headers with Tank Drains Connected to Valves using Iron Brass Ball Valves 

Fresh Water Rinse w/Photo Eye fur customer supplied DI Water Located at the End of the Recirculated Rinse w/DI Rinse Water to Be directed into rinse tank & overflow drain. Flow Rate 6 GPM @ 30 PSI 

Insulation on Both Tanks Wash and Rinse 

Clean-out Doors Wash and Rinse 

Side Enclosure Removable Access Panels for Each Stage 

40 HP High Volume Blower Air Knives Above, Sides, and Below. 

40 KW Blower Duct Heat 

65 Gallon Oil Coalscer 

2000 CFM Steam Exhaust 

Adjustable Stainless Hold Down bars for each lane 

Drive Motor with 0-6 FPM 

Automation Direct PLC with Programming 

Metering Pump Blue White Solution Metering Pump & Grate Lakes Conductivity Controller for Monitoring & Adding Chemistry to Tank 

Lock Out Tag 

Nema 12 Elctrical Box 400 Amp Disconnect

Very Nice washer with little usage. Originally built to clean light parts that needed to be held in place by Adjustable Stainless Steel Hold Down Bars. 

Dimensions: 276" L x 100" W x 113.5" T, Approximate Weight: 20,000 lbs.

Specifications

ManufacturerJRI Holdings
ModelMCCS-3000SS2F
Year2016
ConditionUsed
Stock Number0307672